Gadgetwikimedia.blogspot.com: Trick

Hot

Showing posts with label Trick. Show all posts
Showing posts with label Trick. Show all posts

Monday, January 18, 2016

How to Solve your Phone Lock code is Forgotten in the series Sony Xperia

7:15 AM 0


How to Solve your Phone Lock code is Forgotten in the series Sony Xperia

Among techs, perhaps the problem affected Hp android phone lock or key pattern is often encountered. Usually the problem was complete with just wiping with get into recovery mode with the use of a specific button, or often in the familiar with the format of three fingers.

But unfortunately it is not as easy as it is on Sony Xperia android. On the type of the Xperia series, its no recovery mode or in hide.

Finally the last method inevitably do, namely at full flashing, but there are actually other ways without having full flashing which would have been time consuming and quite a long process. His tips are quite flashing parts URloader.sin and URuserdata.sin. The process is very fast and not time consuming.

Required materials:

1. Download and install Sony USB driver
2. Download XperiFirm v3.1 (function to download firmware Sony)
3. Download Sony Flashtool

Steps of Flashing:

1. open XperiFirm v3.1


a. Select the type of Sony Xperia machined
b. Select the desired country
c. click on the left and then the download Window will appear

2. on the download window


a. the download process will run when click "download"
b. Previous checkbox "Unpack automatically". In order to check this in the firmware already downloaded will be decrypted into 4 files, in order to make the ftf file.

3. If already click download, wait for the download to finish
4. Then open the Flash tool


Select Tools SeusDecrypt >
Read More
Diposkan oleh di No comments:
Label: , , ,

Sunday, January 17, 2016

How to Repair bootloop At ViewPad 10s

6:34 AM 0


This time VTIGA place HP and Laptop course, the arrival of the 10-inch tablet with a brand ViewPad 10s, have problems bootloop / stucklogo. This brand is not familiar in Indonesia, because it apparently comes from Thailand, especially confusing when looking at the specifications of this tablet is equipped turns of NVIDIA Tegra 2 CPU.
Our first action was trying to get into its recovery mode, and it does not exist. Then try connecting to the PC, in the device manager terdetect ADBnya, we wrote langsungs beriperintah for wiping, but the results still nil condition is still stalled in bootloop.

Finally we conclude that for mngeatasi problem like this we have to do flashing. The following preparation and an explanation:

A. Software and Materials prepared

1. ViewPad USB driver
2. ViewPad 10s Firmware
3. USB data cable to USB


B. Step Flashing

1. Turn off the ViewPad 10s, make sure the battery remaining 60% min, then connect the ViewPad 10s using a data cable to pc

2. Hold down the button 1 (the Back button) 1 second then hold the 2 button (power button), (try to keep the button 1 while holding down 2, then release the button 2 for 1 second, danlepaskatombol 1 for 1 second.

3. Then check whether the parts of the device manager has been detected "APX"


4. Right-click the "APX" and select "update driver software"
Read More
Diposkan oleh di No comments:
Label: , , ,

How to Repair Hard Bricked and Stuck Logo on Asus Zenfone 4

6:28 AM 0


Maybe for those who often find Zenfone 4 which stuck the logo, simply doing a full flashing by using sd card already in copy firmware didalamnya.Pilih "sd download" via Droid boot.Namun sometimes when met Zenfone the brick plus logo stuck anyway, all variants state on firmware zenfone 4 will be rejected outright. And it was experienced by one of the crew V-three.

How do I handle? Not hard turns, just take a second course of the firmware file that we use for flashing via sd card.Berikut explanation.

Supplies needed include:
1. Firmware Asus T00I are intended flashing via sd card
2. Fastboot and Adb drivers who have terisntall
3. Winrar
4. Download the Android SDK and then installed. Download folder "Platform Tools" course

Measures steps:
1. Download the firmware Asus are as shown below

2. We extract into one folder

3. Then we Fastboot.img boot.img file and copy and put into the folder "platform tools"

4. After the input CMD file into the folder "tools platform" by dragged like this

5. Press the Power up and Volume Up to enter the boot droid

6. Connect your phone to the PC. Open the folder "platform tools", double-click "cmd". Furthermore, write the following command.

7. The first command type "fastboot devices" function to check whether the device is ready in Fastboot mode what the second belum.Perintah type "fastboot flash boot boot.img" and enter.Fungsinya for flashing boot section only. The third command, type "fastboot flash Fastboot Fastboot.img" then enter. Its function is to flash the Fastboot section only


8. When finished, try restarting Zenfone 4. Zenfone 4 is back to normal
Read More
Diposkan oleh di No comments:
Label: , , , ,

How to Repair Sony Xperia Z1 C6903 Dead Boot

6:24 AM 0


As the flagship variant of Sony Mobile, Xperia series smartphones termsuk successful in the world market. Homeland in the smartphone market, sales also included nice. Thus, as a technician, we must be prepared to face this Xperia type damage.

On this occasion, VTIGA HP and Laptop Technician Course will discuss how improvements Sony Xperia Z1 dead C6903 total.

Repairof dead phones total required precise and accurate analysis. If we only try to guess the location of the damage, the results are often unsatisfactory. How do proper analysis? Must necessarily follow a standard repair procedure. And always begins by checking the current usage of the mobile phone. The process of checking the flow, enough to power supply 1 A

By connecting the output of the Power Supply connector to the mobile phone battery, and set the output voltage of a power supply of 3.7 volts, we can see the large current into the cell phone from his Ampere meter. In the picture that was shown by the meter at the bottom of the Power Supply. Of the current consumption is read, we can determine the location of damage.

Back to the case of the Sony Xperia Z1 C6903 brought the student, slightly above the current consumption of 100 mA. From here we can know that, IC power is already working. To determine whether the CPU it can work or not, the phone trying recharged using Flash software tool. If the CPU can not be detected at all. The process is continued by analyzing its hardware parts. Among the most important is the working voltage required by the main chips such as CPU, eMMC etc.

However, if the CPU phones are still detected, corrective measures followed by filling the firmware into the phone. Expected after the process is complete, the phone back on. However, not all cases of damage as simple as that, there are also many, after the charging process is complete, the phone still will not turn on. Such cases are often termed mobile experience 'bricked'.

If the device is Sony already experiencing bricked, certainly can no longer flashing using Flashtool that we use, again, and usually the device is bricked could be due to a failure in the system, or in the process of flashing or updating software dropped out of the street so that a brick or a successful update but part of the boot is not updated, At this time the case is the Xperia Z1 C6903, approximately characteristics are experiencing brick devices, among others:

1. Should be in flashing using normal tools, but if in turn it is still no response
2. No tand apada lcd / led after the turn on the power
3. There is no sign on lcd / led while in charger
4. No sign terdeteksisaat connected to pc
5. Pc can not detect the Flash mode while holding vol -
6. The device does not vibrate sat holding the power button and vol +

Materials are prepared:

1. Download Sony Flashmode Usb last driver installed
2. Download S1 tool
3. Download Firmware section APPSW to c6903
4. Download Flashtooldan full firmware for C6903

Remedial measures:

1. Because it uses usb been undetectable way then we should use the Test Point in order to go into emergency mode, it is necessary disassembly C6903 Sony Z1 her, roughly picture like this

At the point marked arrows, connect to GND using a paper clip or pin set, tricks go into emergency mode first pull and combine batrenya point to GND then attach the battery and turn on the power, then the device is ready to go into emergency mode

2. Run the tool S1

In the emergency phone type select mode

3. Then click the button flash

Navigate to the folder firmware for C6903 that we downloaded

4. Once it is still on the S1 Tool click on the button "test point ready" and make sure the device manager has been detected "SEMC FLASH" during a test point earlier

5. After that wait until the process is complete, after it to make sure, turn the device off and hold vol - and connect it to the PC, when it is detected automatically, then it's a success. Furthermore, we stayed flashing using Flashtool or using Sony PC companion


After flashed using Flashtool, the Sony Xperia Z1 back to normal.
Read More
Diposkan oleh di No comments:
Label: , , ,

How to Repair Advan T2c Hard Bricked

6:14 AM 0


How to Repair Advan T2c Hard Bricked

 Android development is so fast, certainly not wasted by the mobile phone manufacturers in the world. Moreover, because it is 'open source', the android can be used without having to pay expensive royalties. Not surprisingly, almost all manufacturers of mobile phones today, using Android as the operating system.

Because not all phones use the same type of chip processor, the operating system used must be tailored to the type of CPU that is used. Therefore, we can not easily fill the firmware of a mobile phone. Firmware which must be filled in accordance with the type and brand of the mobile phone.

The problems most often encountered by fellow technician is, the difficulty of finding the type of firmware that is really suitable for android phones. Especially phones that the brand is not global like Samsung, Sony etc. How to outsmart these problems? VTIGA HP and Laptop Technician Course will discuss it.

This time VTIGA gets asus Advan hardbrick T2C the previous result in flashing using the firmware that does not match with the series cpunya, consequently tablet would not start again. When connected with USB, the PC does not respond at all. It is of course different from other Android phones, when connected to a PC via USB, the PC will detect a new device being attached. This condition is accompanied by symptoms that the phone can not enter recovery mode. Indeed, for android that has cpu type hardbrick RockChip have the possibility of failure when flashing. Therefore VTIGA will share their experiences in ways to fix it.

Material - a necessary ingredient, antaralain:

1. RockchipUsbUsb Driver, download and install
2. Rockchip Batch Tool
3. Firmware Rockchip format * .img

How to fix it:

1. Because the tablet is no longer detected in the PC then we need a fishing rod with a short right clicking on cpunya legs, so it must be dismantled first. Seen in the picture beside, Rockchip CPU has pins on all four sides. At the foot of the picture look anywhere that need to be connected manually. Attention, do not let one connecting leg, one-one, CPU instead be permanently damaged.

2. Wherever possible RockchipUsb driver driver, do not let one terinstall.Jika are correct, will be terdetect in the device manager as this.

3. Then go Rockchip batch tool.

(1) Enter the firmware has been downloaded
(2) Since it was detected rockchip automatic drivers on box number 1 will light up, and signaling tools are able to detect
(3) When ready all click on the "upgrade"

4. The progress bar appears on the tools flashingnya.

If the log appear "Upgrade Done Success" shall mean the flashing has been completed

5. Then insert the tablet into recovery mode by holding down the power and volume up, after advan logo appears lepassaja power and keep the button volatas, then select wipe data / factory reset and wipe cache partition, the image will appear as below.

6. Once completed in wiping back life tablet as usual, as a result we managed to mengUnbrick tablet advan T2C.
Read More
Diposkan oleh di No comments:
Label: , , ,

How to Flashing Nokia Windows Phone

6:07 AM 0


Windows smart phone platform can reliably match the greatness of android. Indeed, until now koar-koarnya not so sound. Google's Android is so powerful in this era. But the war does not end here. Anyone who is not leading the race may be complacent, because it was likely there would be skirmishers skirmishers will be mimimpin race later.

VTiga will discuss what if a technician a case of Nokia phones that have OS windows problem. Is it difficult? Should box or flasher as an age when Nokia was victorious? Check out his review below.
What is needed:

1. Nokia Data Package Manager
2. Nokia Care Suit Latest
3. UserGroupConfiguration.cfg

Here is a step flashing

a. The first step, usergroupconfiguration.cfg directed to the folder:
- C: \ Program Files \ Nokia \ Nokia Care Suite \ Data Package Manager \ bin
- C: \ Program Files \ Nokia \ Nokia Care Suite \ Multi Software Updater 5
- C: \ Program Files \ Nokia \ Nokia Care Suite \ Product Support Tool For Store 5

b. Download the firmware using the Nokia Data package manager. Do not forget after that, the firmware incorporated into the C: \ ProgramData \ Nokia \ Packages \ Products



01 4 August 2015 Data Images Thumb Other400 0

Adjust with the product name and product code

c. After downloading the firmware, run care suit as shown below



02 4 August 2015 Data Images Thumb Other400 0

d. Then select the file, open product, and enter the product type on the device which will be flashing. Do not forget to select the model and click Open.



03 4 August 2015 Data Images Thumb Other400 0

e. After that select programming and recovery



04 3 August 2015 Data Images Thumb Other400 0

f. The type of device will be detected in the column. Click the flash.



05 3 August 2015 Data Images Thumb Other400 0

g. The following display will appear that on information on how to connect the device to a PC. Follow the instructions!



06 3 August 2015 Data Images Thumb Other400 0


If we follow the instructions correctly, then the flashing process will run.
Read More
Diposkan oleh di No comments:
Label: , , ,

How to Install WhatsApp for PC

5:49 AM 0


Long awaited, a desktop version WhatsApp finally officially released. The announcement of the presence of a computer version of the chat application is delivered directly by WhatsApp CEO Jan Koum in a posting on his official Facebook account, Wednesday (21/01/2015).

How do I install the application on the desktop (PC) and laptops? Users did not need to download and install any special file on the PC for this version of the application WhatsApp.

As previously disclosed by Koum, WhatsApp users can directly access the service through a web browser or a browser.

That means, users only need to have a browser on the PC. For the initial launch period, Koum prompts the user to run the application through the browser of Google, the Chrome.

In the meantime, new users WhatsApp on Android, Windows Phone, and BlacBerry who can enjoy these features. IOS-based Apple gadget users still need a little patience. According Koum, there are still restrictions on the Apple platform which makes these new features can not be run.

To activate the feature WhatsApp on PC, the user is prompted to visit the page https://web.whatsapp.com use the Google Chrome browser. Which must be done before is updating WhatsApp app from the app store platform respectively.

In these pages, the user will diminat to login using existing QR Code via the latest version of the application WhatsApp. The trick, of an application to enter the menu "WhatsApp Web" to scan (scanning) QR Code that appear on https://web.whatsapp.com in the Chrome browser.

Users did not need to make a new registration for use as web feature is only an extension of the phone. That is, all messages will remain active on the phone.
Read More
Diposkan oleh di No comments:
Label: , , , , ,