How to Repair Advan T2c Hard Bricked

How to Repair Advan T2c Hard Bricked

Android development is so fast, certainly not wasted by the mobile phone manufacturers in the world. Moreover, because it is 'open source', the android can be used without having to pay expensive royalties. Not surprisingly, almost all manufacturers of mobile phones today, using Android as the operating system.

Because not all phones use the same type of chip processor, the operating system used must be tailored to the type of CPU that is used. Therefore, we can not easily fill the firmware of a mobile phone. Firmware which must be filled in accordance with the type and brand of the mobile phone.

The problems most often encountered by fellow technician is, the difficulty of finding the type of firmware that is really suitable for android phones. Especially phones that the brand is not global like Samsung, Sony etc. How to outsmart these problems? VTIGA HP and Laptop Technician Course will discuss it.

This time VTIGA gets asus Advan hardbrick T2C the previous result in flashing using the firmware that does not match with the series cpunya, consequently tablet would not start again. When connected with USB, the PC does not respond at all. It is of course different from other Android phones, when connected to a PC via USB, the PC will detect a new device being attached. This condition is accompanied by symptoms that the phone can not enter recovery mode. Indeed, for android that has cpu type hardbrick RockChip have the possibility of failure when flashing. Therefore VTIGA will share their experiences in ways to fix it.

Material - a necessary ingredient, antaralain:

1. RockchipUsbUsb Driver, download and install

2. Rockchip Batch Tool

3. Firmware Rockchip format * .img

How to fix it:

1. Because the tablet is no longer detected in the PC then we need a fishing rod with a short right clicking on cpunya legs, so it must be dismantled first. Seen in the picture beside, Rockchip CPU has pins on all four sides. At the foot of the picture look anywhere that need to be connected manually. Attention, do not let one connecting leg, one-one, CPU instead be permanently damaged.

2. Wherever possible RockchipUsb driver driver, do not let one terinstall.Jika are correct, will be terdetect in the device manager as this.

3. Then go Rockchip batch tool.

(1) Enter the firmware has been downloaded

(2) Since it was detected rockchip automatic drivers on box number 1 will light up, and signaling tools are able to detect

(3) When ready all click on the "upgrade"

4. The progress bar appears on the tools flashingnya.

If the log appear "Upgrade Done Success" shall mean the flashing has been completed

5. Then insert the tablet into recovery mode by holding down the power and volume up, after advan logo appears lepassaja power and keep the button volatas, then select wipe data / factory reset and wipe cache partition, the image will appear as below.

6. Once completed in wiping back life tablet as usual, as a result we managed to mengUnbrick tablet advan T2C.