How to Repair Hard Bricked and Stuck Logo on Asus Zenfone 4

Maybe for those who often find Zenfone 4 which stuck the logo, simply doing a full flashing by using sd card already in copy firmware didalamnya.Pilih "sd download" via Droid boot.Namun sometimes when met Zenfone the brick plus logo stuck anyway, all variants state on firmware zenfone 4 will be rejected outright. And it was experienced by one of the crew V-three.

How do I handle? Not hard turns, just take a second course of the firmware file that we use for flashing via sd card.Berikut explanation.

Supplies needed include:

1. Firmware Asus T00I are intended flashing via sd card

2. Fastboot and Adb drivers who have terisntall

3. Winrar

4. Download the Android SDK and then installed. Download folder "Platform Tools" course

Measures steps:

1. Download the firmware Asus are as shown below

2. We extract into one folder

3. Then we Fastboot.img boot.img file and copy and put into the folder "platform tools"

4. After the input CMD file into the folder "tools platform" by dragged like this

5. Press the Power up and Volume Up to enter the boot droid

6. Connect your phone to the PC. Open the folder "platform tools", double-click "cmd". Furthermore, write the following command.

7. The first command type "fastboot devices" function to check whether the device is ready in Fastboot mode what the second belum.Perintah type "fastboot flash boot boot.img" and enter.Fungsinya for flashing boot section only. The third command, type "fastboot flash Fastboot Fastboot.img" then enter. Its function is to flash the Fastboot section only

8. When finished, try restarting Zenfone 4. Zenfone 4 is back to normal